D400 Charger
SK-100123
Power Distribution
It supports power distribution, for example,Channel 1-300w, then channel 2-100W, the total power is 400W. Please note the Max power of channel 2 is 200w, but that of channel 1 is 400W.
400w
Channel 1
200w
Channel 2
Twin-channel Charger
SkyRC D400 allows you to charge 2 batteries (same or different) simultaneously and independently.
DC Power Supply
SkyRC D400 can supply 150 watts DC Power on channel 2. User can use it to power equipments that require DC Power. It converts standard 100-240V AC mains to 6-15V DC output.
Synchronization Mode
Employ this function, user can set both channel by channel 1, that saves much time.
PC Software for Data Analysis and Firmware Upgrade
Charge Master can start/stop charging process, and view real-time graphs of current, voltage, capacity and monitor single cell voltage.
What’s in the Box
D400
AC Power Cord
XH Adaptor
Banana connectors with XT60 connector Charging Cable
Charging Cable
Instruction Manual
Specifications
Input Voltage
AC 100-240V/DC 11-18V
Charge Circuit Power
400W
Discharge Circuit Power
36W
Charger Current Range
0.1-20A
Discharge Circuit Power
0.1-5A
Current Drian for Balancing Port
Max 500mA/cell
Trickle Charging Current
50mA-300mA & OFF
DC Power Supply Output
6-15V/Max.10A
LiPo/LiFe/Lilon/LiHV Battery Cell Count
1-7S
NiMH/NiCd Battery Cell Count
1-18S
Pb Battery Voltage
2-24V
Weight
2510g
Size
Length ： 258mm
Width ： 194mm
Height ： 82.5mm
Width ： 194mm
Height ： 82.5mm
