NC2600 Charger

SK-100113 Discontinued

Description
Downloads

SkyRC NC2600 AA/AAA Battery Charger & Analyzer is more than just a battery charger which can perform a number of different functions. If you are interested in getting optimum power, turbo fast charging (up to 2600mA Charge Current) and the longest battery lifespan, this is an excellent choice for you.
The charger has four compartments for AA batteries and AAA batteries and it is able to charge both AA and AAA batteries simultaneously. Due to different battery capacity, you could set the charge rate accordingly or set all at once. With charging,discharging, refresh & analyze, break-in and cycle functions as well as individual LCD displays for charging status; this charging unit is reliable, user-friendly and ideal for use in the home, office or on a trip.

Large LCD display with backlight for easy reading.

Supporting both AA and AAA NiMH/NiCd batteries.

It supports the charger to stand at different tilt angles.

your charger gets its own APP.


	Supporting both AA and AAA NiMH/NiCd batteries. Batteries can be inserted or taken out easily.


	It supports the charger to stand at different tilt angles and offers users the best operational experience.


	Seven buttons for easy programming and operation. Four Slot Number Buttons (SNB) for switching to different slots, and the three other buttons for programming and operation.		Large LCD display with backlight for easy reading. It digitally displays the various operation modes,also the charging current (in mA),charged capacity (in mAh),voltage (in Volt) and elapsed time (in hh:mm).


	It has 5 operation modes based on the condition of the battery.

		Chargeing batteries at the selected rate. Suitable for frequently used batteries.

		Discharging batteries at the selected rate.

		Suitable for batteries stored for more than two weeks but less than 3 months or showing poor performance. This mode can also determine the battery capacity for battery matching.

		Break-in is a charge-discharge-charge process which forces a full charge into the new batteries and those stored for more than 3 months at a very low rate to activate the batteries.

		Performing a charge-discharge cycle for up to 12 times. Cycle mode can remove memory effect of rechargeable batteries.


	Built-In PTC thermistor to avoid over heat & independent negative delta V eliminates overcharging & discharging.		To ensure safety, the charger performs an "impedance check" at the beginning of the program. If the battery fails this test, "FAIL" would be displayed and program will be terminated.


	You could control this smart charger by your smart phone via Bluetooth Smart. Operating this charger on your smart phone gives you the best using experience . What's more, more functions (optional Delta Peak Value and Discharge Termination Voltage) and information (battery temp, internal resistance and voltage graphic) are available on you mobile device.

	Standard Alone Mode	Smart Phone Control Mode
Charging Current	0.2-2.6A	0.2-2.6A
Delta Peak	5mV	3-15mV
Discharging Current	0.1-1.0A	0.1-1.0A
Discharging Termination Voltage	0.9V	0.5-1.0V
Battery Capacity Range	500mAh-3500mAh	500mAh-3500mAh
No. of Cycle	1-12	1-12
Top off Charging Current	100mA	100mA
Maintenance Charging Current(Trickle)	30mA	OFF, 10mA-50mA
Temperature Portection	55℃	55-70℃
DC Adaptor Input Power	12V/2.5A
USB Power	5V/2.1A
Weight(Without DC Adaptor)	360g
Dimensions(LWH)	154x104x51mm

Manuals

NC2600 Instruction Manual V1.0 pdf

2019-11-21

View Download

APP

Chrome

Firefox

Edge

Safari

NC2600 Charger

About SKYRC

Where to Buy

Support

CONTACT US